翻訳と辞書
Words near each other
・ Oilseed press
・ Oilskin
・ Oilton
・ Oilton, Oklahoma
・ Oilton, Texas
・ Oilville
・ Oilville, California
・ Oilville, Virginia
・ Oilville, West Virginia
・ Oily bitterling
・ Oily fish
・ Oily Hare
・ Oily Rag
・ Oily rag
・ Oily to Bed, Oily to Rise
Oily water separator (marine)
・ Oily Water Separators
・ OIM
・ OIMB
・ Oin
・ Oin-Oin
・ Oina, Estonia
・ Oinacu
・ Oinafa
・ Oinam
・ Oinam Bembem Devi
・ Oinatz Aulestia
・ Oinatz Bengoetxea
・ Oingo Boingo
・ Oingo Boingo (disambiguation)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Oily water separator (marine) : ウィキペディア英語版
Oily water separator (marine)
An oily water separator (OWS) is equipment to separate oil and water mixtures into their separate components. This page deals exclusively oily water separators aboard marine vessels. They are found on board ships where they are used to separate oil from oily waste water such as bilge water before the waste water is discharged into the environment. These discharges of waste water must comply with the requirements laid out in Marpol 73/78.
Bilge water is a near-unavoidable product of shipboard operations. Oil leaks from running machinery such as diesel generators, air compressors, and the main propulsion engine. Modern OWSs have alarms and automatic closure devices which are activated when the oil storage content of the waste water exceeds a certain limit.
==Purpose==

The purpose of a shipboard oily water separator (OWS) is to separate oil and other contaminants that could be harmful for the oceans. The International Maritime Organization (IMO) publishes regulations through the Marine Environment Protection Committee (MEPC).〔International Maritime Organization. (May 21, 2013). IMO Marine Environment Protection Committee 65th session pushes forward with energy-efficiency implementation. Retrieved from http://www.imo.org/MediaCentre/PressBriefings/Pages/18-MEPC65ENDS.aspx#.U0gcHPldU4c〕 On July 18, 2003, the MEPC issued new regulations that each vessel built after this date had to follow. This document is known as MEPC 107(49)〔(MEPC 107(49) )〕 and it details revised guidelines and specifications for pollution prevention equipment for machinery space bilges of ships. Each OWS must be able to achieve clean bilge water under 15 ppm of type C oil or heavily emulsified oil, and any other contaminates that may be found. All oil content monitors (OCM) must be tamper-proof. Also whenever the OWS is being cleaned out the OCM must be active. An OWS must be able to clear out contaminants as well as oil. Some of these contaminating agents include lubricating oil, cleaning product, soot from combustion, fuel oil, rust, sewage, and several other things that can be harmful to the ocean environment.〔Van Hemmen H. F. (unknown). Initial Recommendations for Bilge Oily Water Separator System Design and Operation. Retrieved from http://legacy.sname.org/committees/tech_ops/oilywater/meets06.pdf〕

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Oily water separator (marine)」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.